# Testing Okta New Device Behaviour policy

**URL:** <https://devforum.okta.com/t/testing-okta-new-device-behaviour-policy/10850>\
**Category:** Questions\
**Created:** [September 7, 2020, 11:30am UTC](https://devforum.okta.com/t/testing-okta-new-device-behaviour-policy/10850 "2020-09-07T11:30:26Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![naresh0460](https://avatars.discourse-cdn.com/v4/letter/n/6f9a4e/32.png) [@naresh0460](https://devforum.okta.com/u/naresh0460)\
**Post date:** [September 7, 2020, 11:30am UTC](https://devforum.okta.com/t/testing-okta-new-device-behaviour-policy/10850/1 "2020-09-07T11:30:26Z")

</div>

Hi

I was testing the Okta New Device behaviour policy. I set the evaluate against 2 authentications and the behaviour policy is added to signon policy rule . I followed the below steps to test the policy.

- Login with Chrome browser - the rule is triggered with New Device= POSITIVE ( then logout )
- Login with Safari browser - the rule is triggered with New Device= POSITIVE ( then logout )
- Login with Firefox browser - the rule is triggered with New Device= POSITIVE ( then logout )

Now tried with chrome browser ( from 1st attempt with same DeviceFingerprint ), I was expecting this time again the rule should trigger with New Device= POSITIVE ( as New Device evaluation is 2 authentications ) but the rule is not evaluated as New Device=NEGATIVE.

please can I get some help in

- My expectation as outcome in the above case is correct? then why the rule didn’t trigger.
- Whether Okta still remembering the device fingerprint for the chrome browser after 2 authentications?

Thanks in Adv.

---

<div class="post-metadata">

**Author:** ![sigama](https://sea1.discourse-cdn.com/oktadev/user_avatar/devforum.okta.com/sigama/32/5811_2.png) [@sigama](https://devforum.okta.com/u/sigama)\
**Post date:** [September 23, 2020, 9:56pm UTC](https://devforum.okta.com/t/testing-okta-new-device-behaviour-policy/10850/2 "2020-09-23T21:56:23Z")

</div>

Hi @naresh0460! Please open a support ticket through an email to [support@okta.com](mailto:support@okta.com) with this issue. One of our Support Engineers will be happy to assist you further.

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/oktadev/original/1X/589c4c5f80de422d01f47cee7185a7fb8227835c.png) [@system](https://devforum.okta.com/u/system)\
**Post date:** [January 25, 2024, 6:38pm UTC](https://devforum.okta.com/t/testing-okta-new-device-behaviour-policy/10850/3 "2024-01-25T18:38:31Z")

</div>

This topic was automatically closed 24 hours after the last reply. New replies are no longer allowed.